Jul 19, 2011

Signal Frequency is out of range

  July 19, 2011    

Problem:
This "Signal frequency is out of range" problem is cause of incompatible monitor
plugged in your computer. If you replace the monitor, this error will display. I
encouter these problem mostly when I replace LCD monitor and not easily recog-
nized by the computer.

Solution:
1. Uninstall the VGA driver through device manager. Right click My Computer
    from the Desktop and choose Properties.



2. System Properties will pop up. Click Hardware tab and click
    Device Manager button.



2.Device Manager will pop up. Locate Display adapter. Right click on it.
   Choose Uninstall.




















4.Uninstall dialog box will pop and  choose to uninstall the driver.
5. After you uninstall the VGA driver, install it again.
6. You can download the VGA driver of your motherboard on the
    internet. If you have the CD of your motherboard driver, insert it
    on CDROM drive and install it.

This procedure will solve the Signal frequency problem of your computer.

  

  No Comments

Jul 11, 2011

Mouse wheel not working

  July 11, 2011    

Problem
I install new optical mouse to our one HRD staff to replace her old mouse.
I open up one excel files to test the mouse. I notice that all buttons of mouse
is working except its scroll. I thought the mouse is defective but when I tried
to use it in other computer, its scroll is functioning. It seems like there is
problem on the configuration of mouse on that computer. I tried to check the
configuration and here's all the method I have done.

Solution
1. Click the Windows Logo at the bottom and choose Control Panel.




























2. Control Panel will pop up. Click the mouse.

















3. Mouse Properties dialog box will appear, click Hardware tab.
    Then click Properties button.

4. Microsoft PS/2 Mouse Properties will appear. On Wheel
    detection, choose Assume wheel is present in drop down
    list. Then, press Ok button.




























After doing this procedure, open Microsoft Word document and
try the wheel of the mouse if it is working.

  

  2 Comments

Jul 3, 2011

Fixing NetBT clearing error

  July 03, 2011    

Problem
One of my network user called me up and told me that
she could not connect to the map drive. I ping her computer
ip address and the result is good. I can also control her
computer remotely. I tried to repair her network connection
using Repair button of Local Area Connection Status.


This is the error I got while repairing the computer's connection.













 NetBT is acronym for NetBIOS over TCP/IP. NetBIOS is stand for
Network Basic Input Output System. It is responsible for sending and
receiving of data. If NetBT encounter problem, it cannot connect to any
network resources like mapped drive where files are located.

Solution
1. Download the WinSockXPFix.exe in the link below.
    http://www.snapfiles.com/downloads/
    winsockxpfix/dlwinsockxpfix.html

2. Run the WinSockXPFix.exe on the computer
    that have NetBT clearing error.
3.Wait until the program complete the fixing process.

After WinSockXpFix.exe completed the repair process, you can
now access the map drive. This software works for this problem.

  

  No Comments

Subscribe to: Posts (Atom)